4 Simple ways to get a broken key out of the lock without damaging

 Locks are made of different kinds of metal. The manufacturer of the locking mechanism uses a mixture of various metals to give it the required strength.

However, the keys of the lock are most vulnerable to damage. These keys are exposed to various weather conditions. The keys may get wet in the rain during the rainy seasons. Also, dust and dirt particles sticking to the keys may rust the metal. You carry them in your pocket where it may have to deal with the weight.

Slowly, the key loses its strength; one day, it suddenly breaks while opening the lock. It is challenging to remove the broken half part of the key from the lock. Now you have a half part in your hand, and the remaining half stuck inside the lock. In such a situation, you may feel hopeless.

Here is the top solution to remove the broken key from the lock. It will answer your query about how to get a broken key out of a lock. Read the guide carefully and apply it if you are dealing with the same issue.

1) Powerful magnet

The locking system holds the key in the pores. When the key breaks, it resides inside the hole. If you have a powerful magnet used in the home science or kids' practical exam, you can easily remove the broken piece of the key from the lock.

The key is not stuck but fits perfectly in the available space. Thus, when you use the powerful magnet and hold it near the broken part. The key made of iron would get stuck to the magnet. Hold the magnet tight, and move it a little to let the key get a release from the locking system.

After that, pull the magnet gently away from the lock; if the key is close enough, it will quickly get pushed out because of the magnetic field. A broken key part will stick to the magnet, and you will have a clean working lock back to normal condition.

2) Tweezers

The Tweezer is the perfect tool to pull the stuck key out of the lock. Get the tiny tweezers. Put both ends on the opposite side of the broken key. Hold it tight and pull the key out. While doing this, ensure that you are not putting the Tweezer far inside, because the edges of the Tweezer will get stuck in the tiny space.

In the worst-case scenario, the Tweezer will break and get stuck inside. So be careful while handling the tool and ensure you are not pushing the key inside.

3) Tapping the Cylinder

It is a pretty old method but works in most cases, and the broken key will get released from the lock quickly when you tap on the locking cylinder. The vibration produced due to heavy tapping will cause the key to come out from the cylinder. Before you do anything, use this method. Hold the lock downside where the keyhole is pointed at the ground.

Now use the metal stick or small rod to tap on the lock. You can also use the tablespoon to create the vibration while tapping. The cylinder will move, and the broken key will fall. If that doesn't work, use the hammer to produce more vibration. Striking on the metal body would make the system move slightly.

The locking system has the cylinder pin holding the key in its position. The striking vibration will make the pin move back and forward, giving the broken key sufficient time to pass through the hole and fall.

4) Call a locksmith

If nothing works, the final step is hiring a locksmith repair person to remove the broken keyin a lock. The professional locksmith will help you to get a broken key out of the lock without damaging the system. Let the expert do the job if you do not have the necessary tool.

Locking systems are made to protect your house; thus, the cylinder function will not allow the key to disengage quickly. It would require a specialized tool that only a locksmith may provide. Also, the experienced locksmith will know how to handle the stuff.

What is the fastest way to get a broken key out of the lock?

Leaving this job to the experts is the only way to resolve the problem quickly. Experience locksmiths know how to handle the different kinds of locks. The key stuck inside the lock would have a specialized mechanism that holds the key inside.

You will no longer be able to use the locking after the key is fully jammed inside the lock. The proper tools are needed to pull the key out; otherwise, the key may get stuck, and you have to replace the entire lock. Emergency locksmith services will be a call away.

Be patient and take the wise decision to handle your door locking system. You do not need to spend time on the do-it-yourself method. Keep the locksmith's contact details handy because you may need the professional anytime.

A reputed locksmith company will also offer you a yearly maintenance package where they will manage all your security systems regularly.

Keep the broken key in the lock on the table or in a safe place where others will not touch it. Large size locks are made of single molded metals; thus, you cannot break them easily.

The mechanism inside may get a break if you use harsh practice to get the key out. thus keeping the lock away from the layman who may think they can remove the broken key.

There is a high possibility that you may end up causing damage to the cylinder if you remove it yourself. Wait for the locksmith to visit and inspect the situation.

Besides that, hiring a professional company also ensures that your security is in safe hands. Locksmith Company sends only the best people on the job to solve customer issues.

Certification is proof of their presence in the industry. If anything goes wrong, you will have backup to get compensation for the damage. Therefore, hiring the right person is essential for the job. Get in touch with the experts and get your problem resolved.

Worcester Locksmith Services Ltd

53 Lion Ct, Worcester WR1 1UT, United Kingdom

+441905701011